Taking the proportional gas burner as an example, its working process has four stages: preparation stage, pre-purge stage
As a mechatronic equipment with a high degree of automation, the riello burner can be divided into five major systems based on its functions
Principle: When the power is turned on, the solenoid coil generates electromagnetic force to lift the closing member from the valve seat, and the valve opens
The riello burner is a mechatronic equipment with a high degree of automation and involves a wide variety of parts.
The flame detector is one of the essential accessories of the Riello burner. How does the flame detector work
Ultraviolet flame detector. Flame detector: Its main function is to monitor the formation of flames and generate a signal to report to the program controller.
The function of the burner air supply system is to deliver air with a certain wind speed and volume into the combustion chamber.
Burners are also called burners. According to the fuel type, they can be divided into oil burners and gas burners. Light oil burners refer to oil burners.
Diesel burner, also called light oil burner, is a burner that uses light oil fuel. Diesel is also a very common fuel
The company was founded in 1950 when two friends, Mr. Giuseppe Ballanti and Mr. Ferdinando Tura, seized the opportunities provided
The ultra-low nitrogen burner has perfectly solved the problem of excessive nitrogen emissions for us and made a huge contribution to protecting the environment.
After the burner is connected to the power supply, press Start and the motor will not rotate.
The burner is fully automatic and does not require human command set monitoring. To avoid malfunctions, please pay attention to the following matters:
The selection of oil and gas boiler burners should be based on the structural characteristics and performance requirements of the boiler body
Instructions for use of low-nitrogen burner: After pre-blowing air for 13 seconds, the oil pump solenoid valve automatically opens,
