Explanation of the correct use of filters

There are generally two types of filters, oil filters and air filters.

Read

Analysis of the problems and maintenance that need to be paid attention to when

When connecting the peripheral circuit and realizing automatic control of boiler temperature, pressure, water level, etc.,

Read

Main application areas of damper actuators

Blower damper damper, primary air inlet damper, air preheating damper damper, flue gas recirculation, bypass damper damper

Read

Introduction to four control methods of servo motors

Servo motors are widely used in the automation industry. Here we introduce the characteristics and functions of four types of servo motor control methods.

Read

Selection and use of flame detectors

Use three-band infrared flame detectors outdoors in petrochemical projects, and use dual-band infrared flame detectors indoors.

Read

Introduction to the system features of gas filters

The gas filter uses a new type of asymmetric membrane material with excellent performance of intermetallic compounds as the core,

Read

How to choose burner accessories for boiler renovation

In boiler renovation, most companies only pay attention to the choice of boilers, but often ignore the important part of burners and burner accessories.

Read

Correct spacing and height for flame detector installation

When installing point-type flame detectors on the ceiling of an inner corridor with a width of less than 3m

Read

How to deal with flameout failure

When the burner is burning during normal operation, if the fire suddenly goes out, it is a flameout failure.

Read

How to troubleshoot ignition faults

How to judge the ignition failure of the burner? Start the burner three times in a row. If there is no ignition and combustion

Read

Characteristic description of damper actuator

The casing is produced from impact-resistant, heat-resistant plastic.

Read

How to judge the quality of filters

All filters protect engine parts, have a cleaning effect, and extend the service life of the engine.

Read

Importance of filters

There are three common types of filters: air filters, oil filters and fuel filters.

Read

Explain the daily maintenance of the burner

It is recommended that the filter in the oil pump be cleaned every three months. If the filter of the oil pump is found to be dirty, the filter at the back of the oil nozzle also needs to be cleaned.

Read

What should you pay attention to when installing a filter?

The filter is generally installed after the aftercooler and the gas storage tank, as close as possible to the gas terminal

Read