RIELLO
WHATSAPP:+08613761094501
E-MAIL:pittsenli@gmail.com
  • Home
  • About Us
    • About Us
    • Mission
    • R&D Center
    • History
  • Burner
  • Selection
  • Parts
  • Case
  • After service
  • Company
    • Company news
    • Industry News
  • Contact
Riello - Global burner leader brand > Company Information > 公司新闻

公司新闻


Working principle of proportional nozzle on burner


A burner is a device that converts liquid fuel into combustible gas and burns it. The proportional nozzle is an important component of the burner. The main function of the proportional nozzle is to spray liquid fuel and mix it with air to become combustible gas, thereby achieving combustion and generating energy.


The proportional nozzle is composed of a small diameter injection pipe and a circle of small holes around it. The fuel enters the proportional nozzle from the injection pipe and is pressed into the small holes around it. When the fuel passes through the small holes, it rotates at high speed, and then disperses the fuel into very small droplets. At this time, the high-speed rotating droplets mix with air to form combustible gas, which is sprayed out of the proportional nozzle and enters the burner.


The proportional nozzle has high precision and can well control the injection speed and injection amount, thereby controlling the ratio of fuel to air and making the fuel fully burn. In addition, the proportional nozzle also has the function of automatic adjustment, which enables the proportional nozzle to send different injection amounts and speeds to meet the needs of different loads.


When using the proportional nozzle, you need to pay attention to the following points: First, the proportional nozzle should be cleaned, because the small holes in the proportional nozzle are easily blocked by dirt. If it is not cleaned in time, it will affect the injection amount and injection speed. Secondly, you need to pay attention to the use of fuel. The viscosity, density, water content and other parameters of the fuel will affect the working effect of the proportional nozzle. You need to master the correct use method and specifications.


In short, the proportional nozzle is an indispensable and important component of the burner, and its working principle is very simple and efficient. Reasonable use and maintenance of the proportional nozzle can not only improve the efficiency of the burner, but also ensure its long-term and stable operation.


  • Exhaust Gas Treatment for the Main Incineration Processes of Different Incinerat
  • Various Types of "Air" in Pulverized Coal Boiler Burners
  • Components of a Pure Oxygen Combustion System
  • Industrial Gas Burner Safety Operating Procedures introduce
  • Available Flue Gas Waste Heat Utilization Options
  • Analysis of Factors Affecting Boiler Thermal Efficiency
  • Intelligent Combustion Control Technology for Waste Incinerators
  • A Brief Discussion on "Air Preheater Cold-End Integrated Temperature"
  • What You Need to Know About Burner Selection
  • A Basic Introduction to Natural Gas Low-NOx Burners

Back

Working principle of proportional nozzle on burner


A burner is a device that converts liquid fuel into combustible gas and burns it. The proportional nozzle is an important component of the burner. The main function of the proportional nozzle is to spray liquid fuel and mix it with air to become combustible gas, thereby achieving combustion and generating energy.


The proportional nozzle is composed of a small diameter injection pipe and a circle of small holes around it. The fuel enters the proportional nozzle from the injection pipe and is pressed into the small holes around it. When the fuel passes through the small holes, it rotates at high speed, and then disperses the fuel into very small droplets. At this time, the high-speed rotating droplets mix with air to form combustible gas, which is sprayed out of the proportional nozzle and enters the burner.


The proportional nozzle has high precision and can well control the injection speed and injection amount, thereby controlling the ratio of fuel to air and making the fuel fully burn. In addition, the proportional nozzle also has the function of automatic adjustment, which enables the proportional nozzle to send different injection amounts and speeds to meet the needs of different loads.


When using the proportional nozzle, you need to pay attention to the following points: First, the proportional nozzle should be cleaned, because the small holes in the proportional nozzle are easily blocked by dirt. If it is not cleaned in time, it will affect the injection amount and injection speed. Secondly, you need to pay attention to the use of fuel. The viscosity, density, water content and other parameters of the fuel will affect the working effect of the proportional nozzle. You need to master the correct use method and specifications.


In short, the proportional nozzle is an indispensable and important component of the burner, and its working principle is very simple and efficient. Reasonable use and maintenance of the proportional nozzle can not only improve the efficiency of the burner, but also ensure its long-term and stable operation.


RIELLO

Shanghai Qigu Technology Co., LTD
Block I-J, 14th Floor, Greenland Kechuang Building, 201 Ningxia Road, Putuo District, Shanghai
CHINA China,200333
Burner:Contact +08613761094501
Boiler:Contact +08613761094501
Fax :+08613761094501
E-mail:pittsenli@gmail.com


© Qigu Technology – copyright


Navigation

About Us
Burner
Low nitrogen burner
High temperature burner
Special burner
After service
Company
Contact

Networks

International
België/Belgique (Belgium)
Canada
中国 (China)
Hrvatska (Croatia)
Česká Republika (Czech Republic)
France (France)
Deutschland (Germany)
Magyarország (Hungary)
Italia (Italy)
Latvija (Latvia)
Polska (Poland)
România (Romania)
Россия (Russia)
España (Spain)
Slovenija (Slovenia)
United Kingdom
United States

Link

  • riello spare parts
  • plc control cabinets
  • 空压机配件
  • 电气控制柜
  • 利雅路燃烧器