Cleaning burner equipment can improve combustion efficiency, extend life, and reduce failures and maintenance costs.
Cleaning methods:
1. Determine the cleaning cycle
The cleaning cycle of the burner equipment should be determined according to the actual situation. It is generally recommended to clean it every three months.
2. Turn off the power supply and valve
Before cleaning, turn off the power supply and gas valve of the burner equipment to ensure safety.
3. Disassemble mechanical parts
Remove the mechanical parts and clean them, such as fan blades, adjustment doors, nozzles and combustion chambers.
4. Scrub
Use a clean soft cloth or brush to scrub the mechanical parts and combustion chamber. If there are stubborn stains, you can use a professional cleaner.
5. Dust removal
After cleaning the mechanical parts and combustion chamber, dust the burner equipment and use a vacuum cleaner or a clean soft brush to remove the dust.
6. Install mechanical parts
After cleaning and dust removal, reinstall the mechanical parts on the burner equipment and check whether they are firmly installed.
7. Debug the burner
After cleaning and installing the mechanical parts, turn on the power supply and gas valve again, and debug and test the burner.
Notes:
1. Before cleaning the burner equipment, the gas must be cut off to avoid fire, etc.
2. When disassembling and cleaning the mechanical parts, be sure to handle them with care to avoid damage.
3. When cleaning, be sure to use specific detergents or other mild detergents. Never use strong acid or alkaline detergents, otherwise it will cause damage to the mechanical parts.
4. After cleaning, be sure to carefully check and debug the mechanical parts to ensure the normal operation of the burner equipment.
5. It is recommended to ask professional technicians to check and maintain regularly to ensure the normal operation of the burner equipment.
Cleaning burner equipment can improve combustion efficiency, extend life, and reduce failures and maintenance costs.
Cleaning methods:
1. Determine the cleaning cycle
The cleaning cycle of the burner equipment should be determined according to the actual situation. It is generally recommended to clean it every three months.
2. Turn off the power supply and valve
Before cleaning, turn off the power supply and gas valve of the burner equipment to ensure safety.
3. Disassemble mechanical parts
Remove the mechanical parts and clean them, such as fan blades, adjustment doors, nozzles and combustion chambers.
4. Scrub
Use a clean soft cloth or brush to scrub the mechanical parts and combustion chamber. If there are stubborn stains, you can use a professional cleaner.
5. Dust removal
After cleaning the mechanical parts and combustion chamber, dust the burner equipment and use a vacuum cleaner or a clean soft brush to remove the dust.
6. Install mechanical parts
After cleaning and dust removal, reinstall the mechanical parts on the burner equipment and check whether they are firmly installed.
7. Debug the burner
After cleaning and installing the mechanical parts, turn on the power supply and gas valve again, and debug and test the burner.
Notes:
1. Before cleaning the burner equipment, the gas must be cut off to avoid fire, etc.
2. When disassembling and cleaning the mechanical parts, be sure to handle them with care to avoid damage.
3. When cleaning, be sure to use specific detergents or other mild detergents. Never use strong acid or alkaline detergents, otherwise it will cause damage to the mechanical parts.
4. After cleaning, be sure to carefully check and debug the mechanical parts to ensure the normal operation of the burner equipment.
5. It is recommended to ask professional technicians to check and maintain regularly to ensure the normal operation of the burner equipment.