The wind of the boiler is divided into primary wind, secondary wind, tertiary wind and other wind. The types of other winds are more complicated, such as central wind, auxiliary wind, fuel wind, burno
Breakthrough in research and development of flue gas internal circulation nitrogen reduction technology, low nitrogen 50mg does not require flue gas external circulation, reaching the national environ
The hot gas burner is a heating facility (such as a boiler, an industrial furnace, etc.) with hot gas as the heat source, and is a special device used to realize the hot gas combustion process.
Stage burner: Shaanxi gas-fired low-nitrogen boiler designed according to the principle of staged combustion, so that fuel and air are mixed and burned in stages.
First: connect the switching power supply, the motor of the fuel burner is running, spark discharge occurs between the ignition stages, and after about 13 seconds of pre-hair blowing, the vacuum solen
The burner is the core part of the heating equipment, involving knowledge of mechanical structure, gas control, electrical control and many other aspects. The daily maintenance and troubleshooting of
Regardless of any type of burner or burner, an ignition process is required, due to unfamiliarity with product performance in actual operation, or lack of understanding of the basic ignition operation
Regardless of any type of burner or burner, an ignition process is required, due to unfamiliarity with product performance in actual operation, or lack of understanding of the basic ignition operation
The damper is used to adjust the air volume entering the burner, which is directly related to the combustion effect of the burner. There are three methods for adjusting the damper of the methanol fuel
The burner is an important equipment for kilns and furnaces in cement production. It is an important guarantee for the stable ignition and combustion of fuel and the complete combustion of fuel. There
Riello burners have a wide range of target groups, but choosing the right burner is something that most people are confused about.
Fans are widely used in various fields, especially in the application of boilers. Fans are a kind of machinery that converts the mechanical energy of the prime mover into gas that can be transported,
There are many types of fuel for boilers, such as common coal-fired boilers, gas-fired boilers, oil-fired boilers, electric boilers, etc. However, with the environmental protection and economic condit
In the project of using the burner, the burner must be properly maintained. Only in this way can the life of the burner be extended. Here is how to maintain the burner
