After the power is turned on, the burner does not start and the fault light on the control box does not light up.
Disassemble the burner a. Drain the oil in the heating oil pool. Remove the power cord, air pipe, upper oil pipe, and oil pump motor power cord.
What characteristics should a good quality pulverized coal burner have? The combustion acquisition of pulverized coal burners is closely related to the two aspects of flow and radiation.
Boiler burner, as the name implies, refers to the burner used on the boiler. Boiler burner is the most important equipment among the auxiliary equipment of oil
Program controller, the parts of the program controller include: electric eye, photosensitive organ, solenoid valve, ignition electrode, ignition transformer, fan, motor, etc.
For long-term use equipment such as burners, damage and aging are inevitable, which involves repair and maintenance.
In order to evaluate whether the design of the burner is ideal, different standards need to be formulated from many angles.
Accessories are an important part of the low-nitrogen burner. Only by mastering the correct operation method can it be more conducive to the future use effect.
Flame detector, also known as photosensitive fire detector, is a fire detector that detects the intensity of flame burning and the frequency of flame flicker.
The damper actuator is a type of actuator. The actuator is a combination of an actuator and a control valve in an automatic control system.
The choice of burner accessories can reflect the life of the fuel burner. If you want to extend the service life of the burner
There are many types of flame detectors, but the commonly used ones can be used for flame detection of gas and oil industrial burners.
In many projects, damper actuators can simply realize fast linear cyclic motion, with simple structure and convenient maintenance.
How to judge if the burner accessories have ignition failure? First, start the burner three times in a row.
Before each burner is started, the program controller first sends a signal to the leak detector to perform a leak test on the valve group to ensure that the gas valve does not leak.
