There is an alternating process of heat and cold sources between the boiler and the burner. The temperature of the hot flue gas in the furnace can be as high as 800°C to 1000°C, and the combustion-sup
One is to lower the viscosity of the burning heavy oil. As for how to make the temperature during combustion within a definite range, it is necessary to measure the corresponding viscosity value throu
For the furnace body of the new equipment, before commissioning, carefully check whether the gas meets the requirements of the low-nitrogen burner; check whether the detection instruments on the gas s
A Riello burner used on a boiler needs to be ignited several times before it can start working, and the cause of the failure has never been determined. Then the situation became more serious. No matte
The so-called low calorific value gas refers to the gaseous fuel with lower calorific value obtained from the gasification of solid fuels such as coal or coke. The fuel staged combustion technology of
In recent years, due to the improvement of the government's environmental protection requirements, in order to improve the quality of the atmospheric environment, many areas require the transformation
With the strengthening of environmental policies and the elimination of coal-fired boilers, many users will purchase new environmentally friendly boiler products. Natural gas boilers follow the trend
The oil burner uses heavy oil as the raw material, and the heavy oil enters the burner in two ways, which are swirl oil and axial flow oil, similar to the internal and external air of the burner. The
The special-shaped burner adopts low-carbon, environmentally friendly and clean new energy, which can replace traditional energy products such as petrochemical diesel, liquefied petroleum gas, and coa
The heavy oil burner is a common ignition equipment for boilers. It is a combustion equipment designed for heavy oil with high viscosity and poor atomization performance to improve the combustion perf
Heavy oil fuel is a liquid fuel for metallurgy, building materials, chemical industry and other industrial kilns. The heater of the automatic heavy oil burner is mainly used for preheating and heating
The internal combustion gas torch can ensure that the gas can be vented and burned in a timely, safe and reliable manner when it needs to be discharged, and can ensure low-noise and smoke-free combust
The primary air is used to transport and heat the pulverized coal, so that the pulverized coal is sent into the furnace through the primary air pipe, and can supply the volatile matter in the pulveriz
Boiler biogas burner is composed of back pressure valve, flame arrester, manual inspection valve, pneumatic valve, burner, exhaust hole, electrical control device, igniter and so on.
When using oil burners, the maintenance and maintenance of oil burners is very important. Periodic maintenance and maintenance are important conditions for extending the life of the burner.
