RIELLO
WHATSAPP:+08613761094501
E-MAIL:pittsenli@gmail.com
  • Home
  • About Us
    • About Us
    • Mission
    • R&D Center
    • History
  • Burner
  • Selection
  • Parts
  • Case
  • After service
  • Company
    • Company news
    • Industry News
  • Contact
Riello - Global burner leader brand > Company Information > 公司新闻

公司新闻


Types of Nozzles for Diesel Burners


The primary function of a nozzle in a diesel burner (such as those used in oil-fired boilers or industrial heating furnaces) is to atomize diesel fuel into fine droplets while controlling the spray angle and flow rate. Based on their atomization principles, these nozzles are categorized as follows:


1. Pressure-Atomizing Nozzles (Mechanical Atomization)


These nozzles use a high-pressure pump to pressurize the diesel fuel, forcing it through internal swirl slots or precision orifices at high velocity, which breaks the fuel into a fine mist. This is the most common type.

• Simple Pressure-Atomizing Nozzles: These feature a simple, low-cost design and require no additional atomizing medium. However, they have a limited load-adjustment range, and atomization quality tends to degrade at low loads. They are typically used in small-to-medium boilers or equipment with stable load requirements.

• Return-Flow Pressure-Atomizing Nozzles: These build upon the simple mechanical design by incorporating a return-fuel channel. By adjusting the amount of fuel returned, the actual fuel injection rate can be varied, allowing for a wider load-adjustment range and greater operational flexibility.


2. Air-Atomizing Nozzles (Pneumatic Atomization)


These nozzles utilize compressed air—either by mixing it with the diesel or by using high-velocity airflow to shear the fuel—to break the oil stream into fine droplets.


• Characteristics: These nozzles require relatively lower oil pressure, provide fine atomization, and are less prone to clogging. Atomization quality can be optimized by adjusting air pressure or airflow volume. However, they require an external air compressor or air supply, which increases system complexity and energy consumption.

• Common configurations: Internal-mixing, external-mixing, and siphon-type nozzles.


3. Steam-Atomizing Nozzles


These nozzles use high-velocity steam to entrain and break up the oil stream. They are typically employed in large-scale boilers or in applications involving high-viscosity or lower-quality fuels.

• Characteristics: They offer excellent atomization and high adaptability to various fuel types. However, they require a stable steam supply and are associated with some heat loss and noise. 4. Rotary-Cup Atomization (Centrifugal Atomization)


Fuel is fed into a high-speed rotating cup; under the influence of centrifugal force, it is flung off the cup's rim and further atomized by an airflow. This method offers high resistance to clogging and a wide turndown ratio, but it features a complex design and high costs. It is primarily found in large-scale industrial furnaces or equipment designed for handling specialized fuels or waste oils.


  • Types of Nozzles for Diesel Burners
  • Categories of Riello Diesel Burners
  • Price Disparities Between Domestic and Imported Boiler Burners
  • Which Fuel Is Most Cost-Effective for Boiler Burners
  • Fuel Types for Boiler Burners
  • Core Component Brands for Riello Burners
  • The Importance of Genuine Riello Burner Parts
  • What Is the Typical Warranty Period for Boiler Burner Components
  • Core Components of a Boiler Burner
  • What should you pay attention to when exporting Riello burner

Back

Types of Nozzles for Diesel Burners


The primary function of a nozzle in a diesel burner (such as those used in oil-fired boilers or industrial heating furnaces) is to atomize diesel fuel into fine droplets while controlling the spray angle and flow rate. Based on their atomization principles, these nozzles are categorized as follows:


1. Pressure-Atomizing Nozzles (Mechanical Atomization)


These nozzles use a high-pressure pump to pressurize the diesel fuel, forcing it through internal swirl slots or precision orifices at high velocity, which breaks the fuel into a fine mist. This is the most common type.

• Simple Pressure-Atomizing Nozzles: These feature a simple, low-cost design and require no additional atomizing medium. However, they have a limited load-adjustment range, and atomization quality tends to degrade at low loads. They are typically used in small-to-medium boilers or equipment with stable load requirements.

• Return-Flow Pressure-Atomizing Nozzles: These build upon the simple mechanical design by incorporating a return-fuel channel. By adjusting the amount of fuel returned, the actual fuel injection rate can be varied, allowing for a wider load-adjustment range and greater operational flexibility.


2. Air-Atomizing Nozzles (Pneumatic Atomization)


These nozzles utilize compressed air—either by mixing it with the diesel or by using high-velocity airflow to shear the fuel—to break the oil stream into fine droplets.


• Characteristics: These nozzles require relatively lower oil pressure, provide fine atomization, and are less prone to clogging. Atomization quality can be optimized by adjusting air pressure or airflow volume. However, they require an external air compressor or air supply, which increases system complexity and energy consumption.

• Common configurations: Internal-mixing, external-mixing, and siphon-type nozzles.


3. Steam-Atomizing Nozzles


These nozzles use high-velocity steam to entrain and break up the oil stream. They are typically employed in large-scale boilers or in applications involving high-viscosity or lower-quality fuels.

• Characteristics: They offer excellent atomization and high adaptability to various fuel types. However, they require a stable steam supply and are associated with some heat loss and noise. 4. Rotary-Cup Atomization (Centrifugal Atomization)


Fuel is fed into a high-speed rotating cup; under the influence of centrifugal force, it is flung off the cup's rim and further atomized by an airflow. This method offers high resistance to clogging and a wide turndown ratio, but it features a complex design and high costs. It is primarily found in large-scale industrial furnaces or equipment designed for handling specialized fuels or waste oils.


RIELLO

Shanghai Qigu Technology Co., LTD
Block I-J, 14th Floor, Greenland Kechuang Building, 201 Ningxia Road, Putuo District, Shanghai
CHINA China,200333
Burner:Contact +08613761094501
Boiler:Contact +08613761094501
Fax :+08613761094501
E-mail:pittsenli@gmail.com


© Qigu Technology – copyright


Navigation

About Us
Burner
Low nitrogen burner
High temperature burner
Special burner
After service
Company
Contact

Networks

International
België/Belgique (Belgium)
Canada
中国 (China)
Hrvatska (Croatia)
Česká Republika (Czech Republic)
France (France)
Deutschland (Germany)
Magyarország (Hungary)
Italia (Italy)
Latvija (Latvia)
Polska (Poland)
România (Romania)
Россия (Russia)
España (Spain)
Slovenija (Slovenia)
United Kingdom
United States

Link

  • riello spare parts
  • plc control cabinets
  • 空压机配件
  • 电气控制柜
  • 利雅路燃烧器