The burner is fully automatic and does not require human command set monitoring. To avoid malfunctions, please pay attention to the following matters:
1. Be familiar with safety rules.
2. In order to achieve maximum reliability and best economy, the burner must be maintained regularly, at least twice a year.
3. Please pay attention to any abnormal sounds.
4. If the burner cannot start normally and the misfire indicator on the control box is on or off, check whether the power reaches the burner, whether the fuse is normal, and whether the burner control system is connected. On the other hand, if the burner stops working and the misfire light on the control box lights up, please press the reset button to let the burner try to ignite automatically. If it cannot ignite and the misfire light lights up again, please check whether there is oil in the mailbox and Is the manual valve of the combustion line open? If the burner still cannot start after confirming the above conditions, please contact a technician.
5. If the power supply loses phase, the thermal relay in the burner will act, the burner will enter the locked state, and the misfire light will turn on. After connecting the missing wire, in order to start again, please press the thermal relay reset button.
6. When the fuel is used up, the burner automatically stops and the misfire light comes on. Before starting again, please increase the oil level to avoid air being mixed in the oil line.
7. When the ambient temperature is lower than -10°C, if the fuel tank is placed outdoors, please protect the fuel tank and oil pipe to prevent the wax in the oil from solidifying and causing the burner to lock.
8. Make sure the burner room is free of dust.
9. If the burner is not used for a long time, please cut off the main power supply and close the oil valve.
The burner is fully automatic and does not require human command set monitoring. To avoid malfunctions, please pay attention to the following matters:
1. Be familiar with safety rules.
2. In order to achieve maximum reliability and best economy, the burner must be maintained regularly, at least twice a year.
3. Please pay attention to any abnormal sounds.
4. If the burner cannot start normally and the misfire indicator on the control box is on or off, check whether the power reaches the burner, whether the fuse is normal, and whether the burner control system is connected. On the other hand, if the burner stops working and the misfire light on the control box lights up, please press the reset button to let the burner try to ignite automatically. If it cannot ignite and the misfire light lights up again, please check whether there is oil in the mailbox and Is the manual valve of the combustion line open? If the burner still cannot start after confirming the above conditions, please contact a technician.
5. If the power supply loses phase, the thermal relay in the burner will act, the burner will enter the locked state, and the misfire light will turn on. After connecting the missing wire, in order to start again, please press the thermal relay reset button.
6. When the fuel is used up, the burner automatically stops and the misfire light comes on. Before starting again, please increase the oil level to avoid air being mixed in the oil line.
7. When the ambient temperature is lower than -10°C, if the fuel tank is placed outdoors, please protect the fuel tank and oil pipe to prevent the wax in the oil from solidifying and causing the burner to lock.
8. Make sure the burner room is free of dust.
9. If the burner is not used for a long time, please cut off the main power supply and close the oil valve.