The following items should be paid attention to when using the burner:
1. When the gas burner continuously fails the secondary ignition procedure, it should be stopped to check whether the gas supply system of the burner is normal and whether the circuit connection is correct. The burner can only be restarted after the fault is eliminated.
2. It is strictly forbidden to tap or rub the gas supply pipeline with a wrench or a metal rod, so as to avoid static electricity or sparks, which may cause a gas explosion.
3. Smoking, welding, cutting and other illegal operations are strictly prohibited on the gas supply valve group or the flange surface of the pipeline.
4. It is strictly forbidden to conduct open flame tests next to pipelines, valve groups and pressure regulating valves to avoid major accidents.
5. Test whether there is fuel in the gas supply line, usually with a gas low pressure gauge.
6. In the gas supply pipeline, it has been evacuated, but there are residual gases or liquid droplets on the pipe wall, which will also cause combustion and explosion in case of static sparks or open flames.
7. When the gas supply pipeline is ventilated and the valve group needs to be disassembled when there is a fault, the main valve at the front end of the valve group must be cut off first, and then the gas in the pipeline from the main valve to the valve group must be vented, and then the valve group can be disassembled and repaired.
8. In the commissioning work, the gas must be serious, stable and efficient.
9. It is forbidden to use non-explosion-proof electrical and electric tools on site.
The following items should be paid attention to when using the burner:
1. When the gas burner continuously fails the secondary ignition procedure, it should be stopped to check whether the gas supply system of the burner is normal and whether the circuit connection is correct. The burner can only be restarted after the fault is eliminated.
2. It is strictly forbidden to tap or rub the gas supply pipeline with a wrench or a metal rod, so as to avoid static electricity or sparks, which may cause a gas explosion.
3. Smoking, welding, cutting and other illegal operations are strictly prohibited on the gas supply valve group or the flange surface of the pipeline.
4. It is strictly forbidden to conduct open flame tests next to pipelines, valve groups and pressure regulating valves to avoid major accidents.
5. Test whether there is fuel in the gas supply line, usually with a gas low pressure gauge.
6. In the gas supply pipeline, it has been evacuated, but there are residual gases or liquid droplets on the pipe wall, which will also cause combustion and explosion in case of static sparks or open flames.
7. When the gas supply pipeline is ventilated and the valve group needs to be disassembled when there is a fault, the main valve at the front end of the valve group must be cut off first, and then the gas in the pipeline from the main valve to the valve group must be vented, and then the valve group can be disassembled and repaired.
8. In the commissioning work, the gas must be serious, stable and efficient.
9. It is forbidden to use non-explosion-proof electrical and electric tools on site.