Heavy oil fuel is a liquid fuel for metallurgy, building materials, chemical industry and other industrial kilns. The heater of the automatic heavy oil burner is mainly used for preheating and heating fuel oil such as heavy oil and heavy diesel oil, and can effectively control the power compounding of the heat transfer surface.

Daily maintenance and maintenance of automatic heavy oil burner

1. Always keep the surfaces of the equipment clean.

2. When the equipment stops, the rotation of the quick-opening blind plate (flange cover) should be lubricated in time according to the regulations. The screw of the opening and closing part should be coated with lubricating grease. Other parts should also be lubricated as much as possible. Grease parts can be injected with 10# or 20# engine oil.

Maintenance and maintenance of automatic heavy oil burner during operation

1. It is recommended that the operator is responsible for the usual maintenance of the equipment.

2. Always keep the surface of the equipment clean.

3. Monitor the reading of the differential pressure gauge at any time. When the operating pressure difference reaches 0.02Mpa, the filter element should be flushed.