Fully automatic heavy oil burner is equipment for burning heavy oil and asphalt, and heavy oil fuel is liquid fuel for industrial kilns such as metallurgy, building materials, and chemical industry. The heater of the fully automatic heavy oil burner is mainly used for preheating and heating fuel oil such as heavy oil and heavy diesel oil, and can effectively control the power compounding of the heat transfer surface. The hot surface does not coke, which provides conditions for improving the combustion conditions of heavy oil, increasing thermal efficiency, promoting fuel saving and energy saving, and realizing automatic control of fuel oil industrial furnaces. (The outlet temperature is user-adjustable and controllable), with constant temperature control and over-temperature alarm. Heavy oil and residual oil should be heated to above 120°C before entering the automatic heavy oil burner, and asphalt should be heated to about 180°C to obtain a better combustion effect. Usually, the heating of heavy oil, residual oil and asphalt is divided into two stages of heating. The stage one heating is to heat the oil to about 70°C in the oil storage tank and complete the dehydration operation at the same time. The secondary heating is to heat the oil to the pre-combustion temperature after being pressurized by the oil pump before entering the burner, so as to utilize the physical and chemical combustion of the oil. The heating method of automatic heavy oil burner is divided into electric heating and steam heating. For equipment with steam gas source (such as boilers), it is suitable for steam heating, and for equipment without steam gas source (such as industrial furnace burners), it is suitable for electric heating. .
the
The fully automatic heavy oil burner is an energy-saving device that preheats or reheats the fuel oil. It is installed before the combustion equipment to heat the fuel oil before combustion, so that it can It can reduce the viscosity of fuel oil and promote full atomization and combustion. The fully automatic heavy oil burner can finally achieve the purpose of saving energy. Fully automatic heavy oil burner is widely used in preheating or secondary heating of fuel oil such as heavy oil, asphalt, clear oil and so on.
the
Technical characteristics of automatic heavy oil burner:
the
1. The fully automatic heavy oil burner adopts a flame stabilizer, so that the root of the flame can maintain a stable vortex cycle, and reduce the rotation of the internal air, so that the primary air volume can be reduced by half.
the
2. The automatic heavy oil burner adopts a flame hood, so that the heavy oil entrained in the airflow cannot diverge arbitrarily and produce a "shame effect".
the
3. The external net air has intermittent rectangular direct air injection, which is changed to annular gap injection after reaching the front end of the automatic heavy oil burner. At the same time, increasing the area of the annular gap can elongate the flame and increase the average temperature in the kiln.
the
4. The swirl vane is installed at the front end of the inner air duct, 50px away from the front end of the outer air duct wall, which plays a role in gathering the flame and avoiding the high temperature of the kiln head. The aisle handle of the fully automatic heavy oil burner can be adjusted. The position of the swirl vane is positioned at the 6” position of the scale when it leaves the factory. The adjustment range is 0 } 150px, and there is no negative value. The inner wind swirl can only be pulled back to lengthen the flame.
the
5. The central wind blows the high-temperature gas around the nozzle and pushes it back, not only cooling the inside of the nozzle, but also cooling the end surface, thereby protecting the head of the automatic heavy oil burner and prolonging the life of the burner.
Fully automatic heavy oil burner is equipment for burning heavy oil and asphalt, and heavy oil fuel is liquid fuel for industrial kilns such as metallurgy, building materials, and chemical industry. The heater of the fully automatic heavy oil burner is mainly used for preheating and heating fuel oil such as heavy oil and heavy diesel oil, and can effectively control the power compounding of the heat transfer surface. The hot surface does not coke, which provides conditions for improving the combustion conditions of heavy oil, increasing thermal efficiency, promoting fuel saving and energy saving, and realizing automatic control of fuel oil industrial furnaces. (The outlet temperature is user-adjustable and controllable), with constant temperature control and over-temperature alarm. Heavy oil and residual oil should be heated to above 120°C before entering the automatic heavy oil burner, and asphalt should be heated to about 180°C to obtain a better combustion effect. Usually, the heating of heavy oil, residual oil and asphalt is divided into two stages of heating. The stage one heating is to heat the oil to about 70°C in the oil storage tank and complete the dehydration operation at the same time. The secondary heating is to heat the oil to the pre-combustion temperature after being pressurized by the oil pump before entering the burner, so as to utilize the physical and chemical combustion of the oil. The heating method of automatic heavy oil burner is divided into electric heating and steam heating. For equipment with steam gas source (such as boilers), it is suitable for steam heating, and for equipment without steam gas source (such as industrial furnace burners), it is suitable for electric heating. .
the
The fully automatic heavy oil burner is an energy-saving device that preheats or reheats the fuel oil. It is installed before the combustion equipment to heat the fuel oil before combustion, so that it can It can reduce the viscosity of fuel oil and promote full atomization and combustion. The fully automatic heavy oil burner can finally achieve the purpose of saving energy. Fully automatic heavy oil burner is widely used in preheating or secondary heating of fuel oil such as heavy oil, asphalt, clear oil and so on.
the
Technical characteristics of automatic heavy oil burner:
the
1. The fully automatic heavy oil burner adopts a flame stabilizer, so that the root of the flame can maintain a stable vortex cycle, and reduce the rotation of the internal air, so that the primary air volume can be reduced by half.
the
2. The automatic heavy oil burner adopts a flame hood, so that the heavy oil entrained in the airflow cannot diverge arbitrarily and produce a "shame effect".
the
3. The external net air has intermittent rectangular direct air injection, which is changed to annular gap injection after reaching the front end of the automatic heavy oil burner. At the same time, increasing the area of the annular gap can elongate the flame and increase the average temperature in the kiln.
the
4. The swirl vane is installed at the front end of the inner air duct, 50px away from the front end of the outer air duct wall, which plays a role in gathering the flame and avoiding the high temperature of the kiln head. The aisle handle of the fully automatic heavy oil burner can be adjusted. The position of the swirl vane is positioned at the 6” position of the scale when it leaves the factory. The adjustment range is 0 } 150px, and there is no negative value. The inner wind swirl can only be pulled back to lengthen the flame.
the
5. The central wind blows the high-temperature gas around the nozzle and pushes it back, not only cooling the inside of the nozzle, but also cooling the end surface, thereby protecting the head of the automatic heavy oil burner and prolonging the life of the burner.