In recent years, with the continuous improvement of my country's environmental protection requirements and the continuous improvement of the diversification of my country's energy supply, my country's demand for burners is increasing, especially in major large and medium-sized cities in my country and places where conditions permit, oil, gas There are more and more industrial and civil boilers used as fuel, and the core component is the burner. According to incomplete statistics, the number of burners in use in the country is between 1 and 2 million.
More and more domestic companies have begun to manufacture burners. Through joint ventures and technology introduction, product quality and performance have been rapidly improved, and even exported to Europe; foreign companies have begun to set up assembly plants in China due to market strategy and cost reasons. Although there are a large number of domestic manufacturing enterprises, due to the lack of product R&D capabilities, R&D means and awareness of independent innovation, new product development is mainly through simple imitation of foreign products, and the core technology has not been truly mastered, resulting in difficult product quality and performance. Therefore, the product The market share is small. In contrast, foreign products, especially European products, occupy more than 80% of my country's boiler burner market. There are very few domestic companies with annual sales of more than 30 million, while the annual sales of some foreign burner companies have always remained at the level of over 100 million. In recent years, with the rise of some domestic burner manufacturers, the market share of domestic products has been increasing, forcing foreign companies to start reducing profits and opening assembly plants in China.
In 2008, the General Administration of Quality Supervision, Inspection and Quarantine officially promulgated and implemented the "Safety Technical Regulations for Oil/Gas Burners" (TSG ZB001-2008) and "Rules for Type Tests for Oil/Gas Burners" (TSG ZB002-2008). ) The structure and design, installation and system, operation and maintenance, safety and control devices, technical data and nameplate requirements of the burner, as well as the test items and methods of the main technical parameters have been stipulated, and the burner design has been standardized to a certain extent. and manufacturing. At the same time, my country's first burner comprehensive test laboratory jointly established by China Special Equipment Testing Research Institute and Shanghai Industrial Boiler Research Institute has filled the gap in the burner test field in my country and established for domestic burner and boiler manufacturers and research institutes It has established a platform for product development and technology research, and greatly improved the level of domestic technology research in related fields. Third, with the baptism of the market and the continuous improvement of self-awareness, domestic burner manufacturers have made great progress in product quality, technology development, talent reserve and training.
my country's current burner market is mostly occupied by foreign products, and its product quality is relatively guaranteed, and its energy-saving and environmental protection technology is relatively advanced, but some problems are still exposed in domestic use: First, the domestic pollutant discharge limits are relatively relatively low. Loose, and domestic enterprises do not pay enough attention to energy conservation and environmental protection, resulting in the fact that technical factors (such as emissions, energy efficiency, etc.) are often not considered when purchasing burner products, and they only know to blindly lower the price, which seriously hinders advanced combustion with higher prices abroad. devices into the Chinese market. Secondly, at present, the design system of many foreign imported burner manufacturers, such as the power range of the burner is matched according to the foreign boiler specification system, while domestic boiler manufacturers often manufacture the boiler itself and only import the burner, which will cause work problems. The curve, flame shape and furnace resistance, size mismatch and many other situations; on the one hand, the burner cannot operate normally or cannot be debugged, and even accidents occur, causing losses to users, and on the other hand, the energy efficiency of the boiler is reduced; thirdly , due to the wide variety of fuels in our country, as well as the differences in fuel standards at home and abroad and the differences in standard implementation, some burners designed and manufactured in accordance with foreign fuel standards are "acclimatized" when used in China, and have the advantages of reliability, safety, energy saving and environmental protection. Big discounts, even cause safety accidents, fail to meet production requirements, waste energy, and pollute the environment.
In recent years, with the continuous improvement of my country's environmental protection requirements and the continuous improvement of the diversification of my country's energy supply, my country's demand for burners is increasing, especially in major large and medium-sized cities in my country and places where conditions permit, oil, gas There are more and more industrial and civil boilers used as fuel, and the core component is the burner. According to incomplete statistics, the number of burners in use in the country is between 1 and 2 million.
More and more domestic companies have begun to manufacture burners. Through joint ventures and technology introduction, product quality and performance have been rapidly improved, and even exported to Europe; foreign companies have begun to set up assembly plants in China due to market strategy and cost reasons. Although there are a large number of domestic manufacturing enterprises, due to the lack of product R&D capabilities, R&D means and awareness of independent innovation, new product development is mainly through simple imitation of foreign products, and the core technology has not been truly mastered, resulting in difficult product quality and performance. Therefore, the product The market share is small. In contrast, foreign products, especially European products, occupy more than 80% of my country's boiler burner market. There are very few domestic companies with annual sales of more than 30 million, while the annual sales of some foreign burner companies have always remained at the level of over 100 million. In recent years, with the rise of some domestic burner manufacturers, the market share of domestic products has been increasing, forcing foreign companies to start reducing profits and opening assembly plants in China.
In 2008, the General Administration of Quality Supervision, Inspection and Quarantine officially promulgated and implemented the "Safety Technical Regulations for Oil/Gas Burners" (TSG ZB001-2008) and "Rules for Type Tests for Oil/Gas Burners" (TSG ZB002-2008). ) The structure and design, installation and system, operation and maintenance, safety and control devices, technical data and nameplate requirements of the burner, as well as the test items and methods of the main technical parameters have been stipulated, and the burner design has been standardized to a certain extent. and manufacturing. At the same time, my country's first burner comprehensive test laboratory jointly established by China Special Equipment Testing Research Institute and Shanghai Industrial Boiler Research Institute has filled the gap in the burner test field in my country and established for domestic burner and boiler manufacturers and research institutes It has established a platform for product development and technology research, and greatly improved the level of domestic technology research in related fields. Third, with the baptism of the market and the continuous improvement of self-awareness, domestic burner manufacturers have made great progress in product quality, technology development, talent reserve and training.
my country's current burner market is mostly occupied by foreign products, and its product quality is relatively guaranteed, and its energy-saving and environmental protection technology is relatively advanced, but some problems are still exposed in domestic use: First, the domestic pollutant discharge limits are relatively relatively low. Loose, and domestic enterprises do not pay enough attention to energy conservation and environmental protection, resulting in the fact that technical factors (such as emissions, energy efficiency, etc.) are often not considered when purchasing burner products, and they only know to blindly lower the price, which seriously hinders advanced combustion with higher prices abroad. devices into the Chinese market. Secondly, at present, the design system of many foreign imported burner manufacturers, such as the power range of the burner is matched according to the foreign boiler specification system, while domestic boiler manufacturers often manufacture the boiler itself and only import the burner, which will cause work problems. The curve, flame shape and furnace resistance, size mismatch and many other situations; on the one hand, the burner cannot operate normally or cannot be debugged, and even accidents occur, causing losses to users, and on the other hand, the energy efficiency of the boiler is reduced; thirdly , due to the wide variety of fuels in our country, as well as the differences in fuel standards at home and abroad and the differences in standard implementation, some burners designed and manufactured in accordance with foreign fuel standards are "acclimatized" when used in China, and have the advantages of reliability, safety, energy saving and environmental protection. Big discounts, even cause safety accidents, fail to meet production requirements, waste energy, and pollute the environment.