Accessories are an important part of the low-nitrogen burner. Only by mastering the correct operation method can it be more conducive to the future use effect. Let's take a look at the working process of each accessory of the low-nitrogen burner.
1. Check the heating furnace liquid level, temperature or pressure.
2. Burner gas pressure, wind pressure, residual fire inspection. When the fuel is diesel, check the storage capacity of the fuel tank. Whether the oil pipe and oil pump are filled with oil.
3. Leakage detection stage of the gas valve group: check whether the gas valve is airtight.
4. Purge stage before pre-explosion: fully open the damper, purge the furnace, eliminate the residual gas in the furnace, and supply oxygen to the hall to promote the ignition process.
5. Wind pressure detection: ensure the normal operation of the blower.
6. Ignition stage: close the valve of the burner accessories to the ignition position, and open the working mode of the ignition transformer and ignition valve of the accessories to achieve automatic ignition.
7. Confirm that the flame is ignited.
8. Open the damper to the main fire position, and then open the main gas valve to establish the main flame.
9. Close the ignition valve of the burner and confirm that the main flame has been established. Implement the ** small fire conversion or adjust the flame size proportionally.
The burner monitors the temperature or pressure, air pressure, wind pressure, and flame of the heating furnace during the entire working process. If there is an abnormality, the burner and gas valve will be closed and an alarm will be issued.
Accessories are an important part of the low-nitrogen burner. Only by mastering the correct operation method can it be more conducive to the future use effect. Let's take a look at the working process of each accessory of the low-nitrogen burner.
1. Check the heating furnace liquid level, temperature or pressure.
2. Burner gas pressure, wind pressure, residual fire inspection. When the fuel is diesel, check the storage capacity of the fuel tank. Whether the oil pipe and oil pump are filled with oil.
3. Leakage detection stage of the gas valve group: check whether the gas valve is airtight.
4. Purge stage before pre-explosion: fully open the damper, purge the furnace, eliminate the residual gas in the furnace, and supply oxygen to the hall to promote the ignition process.
5. Wind pressure detection: ensure the normal operation of the blower.
6. Ignition stage: close the valve of the burner accessories to the ignition position, and open the working mode of the ignition transformer and ignition valve of the accessories to achieve automatic ignition.
7. Confirm that the flame is ignited.
8. Open the damper to the main fire position, and then open the main gas valve to establish the main flame.
9. Close the ignition valve of the burner and confirm that the main flame has been established. Implement the ** small fire conversion or adjust the flame size proportionally.
The burner monitors the temperature or pressure, air pressure, wind pressure, and flame of the heating furnace during the entire working process. If there is an abnormality, the burner and gas valve will be closed and an alarm will be issued.