Oil-fired boilers have wide adaptability to fuel, and are also cost-effective, and have gradually been loved and used by many business units. Similarly, in the daily operation of oil-fired boilers, there are also some matters that need special attention. Fangkuai Boiler has sorted out the following three main precautions for you, for your reference and mastery.
the
The fuel of the oil-fired boiler has wide adaptability and high cost performance. Because of this, its application range is becoming wider and wider. Of course, when using oil-fired boilers on a daily basis, some matters need to be paid attention to. There are mainly the following three points for attention, as follows:
the
1. Anti-static
the
Fuel is easy to generate static electricity due to friction. When the fuel is transported or unloaded in the pipeline, it can generate a static voltage of more than 200V. ignite. Static electricity is one of the important reasons for the combustion and explosion of fuel oil. Therefore, the entire fuel oil boiler oil system must be cleaned of static electricity in time, and all oil tanks, pipelines, equipment, containers, and oil unloading stations in the oil system must be grounded. Generally, the grounding resistance is below 5Ω, and needs to be checked once a year.
the
2. Antifreeze
the
If the oil contains moisture, it will lead to unstable ignition of the boiler, and in severe cases, it may cause "fire failure". Therefore, fuel oil should be waterproof from transportation and storage, and there should be water-repellent devices at the bottom of oil tanks and daily fuel tanks. If it is found that the fire is unstable during the combustion process, water-repellent treatment should be carried out immediately.
the
3. Fuel filter, heater
the
Various filters in the fuel system need to be cleaned regularly. The light oil filter should be cleaned once a month, using appropriate solvents and compressed air for cleaning. The rotating handle of the heavy oil filter should be rotated left or right by hand when necessary, and rotated at a certain angle. Do not use any tools. For heavy oil filters, the container and filter column should be cleaned regularly according to the quality of the oil product. The filter column should be soaked with the whole solution and not disassembled.
the
The heater of the oil-fired boiler should be disassembled regularly, and the carbon deposits and grease on the inner wall of the container and the heating pipe should be removed with chemicals or tools. Also, always pay attention to the steam outlet of the heating pipe or the steam drain pipe. If oil stains appear, it proves that the heating pipe in the heater has leaked and should be dealt with in time.
Oil-fired boilers have wide adaptability to fuel, and are also cost-effective, and have gradually been loved and used by many business units. Similarly, in the daily operation of oil-fired boilers, there are also some matters that need special attention. Fangkuai Boiler has sorted out the following three main precautions for you, for your reference and mastery.
the
The fuel of the oil-fired boiler has wide adaptability and high cost performance. Because of this, its application range is becoming wider and wider. Of course, when using oil-fired boilers on a daily basis, some matters need to be paid attention to. There are mainly the following three points for attention, as follows:
the
1. Anti-static
the
Fuel is easy to generate static electricity due to friction. When the fuel is transported or unloaded in the pipeline, it can generate a static voltage of more than 200V. ignite. Static electricity is one of the important reasons for the combustion and explosion of fuel oil. Therefore, the entire fuel oil boiler oil system must be cleaned of static electricity in time, and all oil tanks, pipelines, equipment, containers, and oil unloading stations in the oil system must be grounded. Generally, the grounding resistance is below 5Ω, and needs to be checked once a year.
the
2. Antifreeze
the
If the oil contains moisture, it will lead to unstable ignition of the boiler, and in severe cases, it may cause "fire failure". Therefore, fuel oil should be waterproof from transportation and storage, and there should be water-repellent devices at the bottom of oil tanks and daily fuel tanks. If it is found that the fire is unstable during the combustion process, water-repellent treatment should be carried out immediately.
the
3. Fuel filter, heater
the
Various filters in the fuel system need to be cleaned regularly. The light oil filter should be cleaned once a month, using appropriate solvents and compressed air for cleaning. The rotating handle of the heavy oil filter should be rotated left or right by hand when necessary, and rotated at a certain angle. Do not use any tools. For heavy oil filters, the container and filter column should be cleaned regularly according to the quality of the oil product. The filter column should be soaked with the whole solution and not disassembled.
the
The heater of the oil-fired boiler should be disassembled regularly, and the carbon deposits and grease on the inner wall of the container and the heating pipe should be removed with chemicals or tools. Also, always pay attention to the steam outlet of the heating pipe or the steam drain pipe. If oil stains appear, it proves that the heating pipe in the heater has leaked and should be dealt with in time.