1. Matters needing attention when using burner accessories:
1. When connecting the peripheral circuit and realizing automatic control of boiler temperature, pressure, water level, etc., please connect according to the control system wiring diagram.
2. The oil suction pipe shall not be close to the bottom of the oil tank and shall be kept at a distance of 80-120mm. The burner shall be turned off before filling the oil tank. The fuel can be injected into the oil tank after filtering, and the machine can be restarted 20 minutes after filling. The oil system shall not leak oil and gas. Check whether the fuel tank is sufficient before starting the burner.
3. The size of the damper shall match the specifications of the nozzle. When the burner is in use, if the boiler equipped is inconsistent with the boiler used for debugging when the burner leaves the factory, the damper shall generally be adjusted appropriately, but sometimes it is necessary to replace the nozzle with the appropriate specifications and injection angle.
4. The ambient temperature of the burner accessories shall not exceed 70℃, otherwise cooling and heat insulation measures shall be taken. When the burner is used in a colder place, appropriate insulation measures shall be taken for the oil storage device and the oil supply and return pipeline system to prevent it from causing. The oil circuit is blocked due to freezing. At the same time, the control circuit of the burner must not be exposed to moisture or high temperature. Please turn off the burner when cleaning the chimney.
5. The motor should be protected from moisture and should not be used in a humid environment.
6. The burner should be balanced when installed. It should be used horizontally or vertically to avoid tilting.
7. When it is inconvenient to operate the burner directly, an external control switch and electrical protection device should be installed.
8. Check whether the connection of the burner and its components is firm, loose, or has changed position.
9. When the burner is started, prevent the sudden ejection of flames from injuring people and destroying property.
2. Regular maintenance:
1. The light diesel oil used must be clean. Please pay attention to regular cleaning of the fuel tank and oil filter.
2. Under normal use, the oil nozzle should be replaced once a year, and the elastic coupling and rubber parts on the coupling should be replaced once a year and a half.
3. Foreign objects are strictly prohibited from entering the air duct.
4. The site where the burner is used should be away from flammable and explosive materials, and fire extinguishing equipment should be available.
5. Adjust the oil pressure appropriately according to the oil pressure indication value.
6. Check the combustion tube, impeller, flame detector and ignition electrode regularly to remove oil stains and carbon deposits. In particular, the flame detector should be kept clean and not exposed to water.
7. Be sure to cut off the power supply when maintaining the burner.
1. Matters needing attention when using burner accessories:
1. When connecting the peripheral circuit and realizing automatic control of boiler temperature, pressure, water level, etc., please connect according to the control system wiring diagram.
2. The oil suction pipe shall not be close to the bottom of the oil tank and shall be kept at a distance of 80-120mm. The burner shall be turned off before filling the oil tank. The fuel can be injected into the oil tank after filtering, and the machine can be restarted 20 minutes after filling. The oil system shall not leak oil and gas. Check whether the fuel tank is sufficient before starting the burner.
3. The size of the damper shall match the specifications of the nozzle. When the burner is in use, if the boiler equipped is inconsistent with the boiler used for debugging when the burner leaves the factory, the damper shall generally be adjusted appropriately, but sometimes it is necessary to replace the nozzle with the appropriate specifications and injection angle.
4. The ambient temperature of the burner accessories shall not exceed 70℃, otherwise cooling and heat insulation measures shall be taken. When the burner is used in a colder place, appropriate insulation measures shall be taken for the oil storage device and the oil supply and return pipeline system to prevent it from causing. The oil circuit is blocked due to freezing. At the same time, the control circuit of the burner must not be exposed to moisture or high temperature. Please turn off the burner when cleaning the chimney.
5. The motor should be protected from moisture and should not be used in a humid environment.
6. The burner should be balanced when installed. It should be used horizontally or vertically to avoid tilting.
7. When it is inconvenient to operate the burner directly, an external control switch and electrical protection device should be installed.
8. Check whether the connection of the burner and its components is firm, loose, or has changed position.
9. When the burner is started, prevent the sudden ejection of flames from injuring people and destroying property.
2. Regular maintenance:
1. The light diesel oil used must be clean. Please pay attention to regular cleaning of the fuel tank and oil filter.
2. Under normal use, the oil nozzle should be replaced once a year, and the elastic coupling and rubber parts on the coupling should be replaced once a year and a half.
3. Foreign objects are strictly prohibited from entering the air duct.
4. The site where the burner is used should be away from flammable and explosive materials, and fire extinguishing equipment should be available.
5. Adjust the oil pressure appropriately according to the oil pressure indication value.
6. Check the combustion tube, impeller, flame detector and ignition electrode regularly to remove oil stains and carbon deposits. In particular, the flame detector should be kept clean and not exposed to water.
7. Be sure to cut off the power supply when maintaining the burner.