It is easy to predict the problem of material jam during burner maintenance. Generally, many people know how to solve this practical problem, but the most difficult thing is not knowing a system, so we need to understand this value system to be good to solve practical problems.
First, checking fuel quality, product quality issues, checking for machine jams doesn't seem to help. Therefore, we should solve the root of the problem and carefully check that the fuel particles meet the operating requirements.
Secondly, check the feeding rod and rod, if the feeding center is different, wrong, the feeding rod is blocked, and the drying material is deformed, then correct or replace it in time.
Third, check whether the configuration of the fuel and feed rods matches, whether the fuel is too long, or whether the coal ash is too much debris that is affected by too much fuel supply.
Fourth, check the power of the motor, the internal combustion engine is too small, reversed, the motor wiring is wrong, and the overload shutdown may cause temper problems that cause illegal start of the burner.
Finally, check the relevant configuration, if the anti-tempering baffle is too large or the cross-section of the feed is too small, the impact of the biomass burner anti-tempering; the bottom wind is too large, the wind and air curtain is too large, and the smoke is directly behind the brain result.
It is easy to predict the problem of material jam during burner maintenance. Generally, many people know how to solve this practical problem, but the most difficult thing is not knowing a system, so we need to understand this value system to be good to solve practical problems.
First, checking fuel quality, product quality issues, checking for machine jams doesn't seem to help. Therefore, we should solve the root of the problem and carefully check that the fuel particles meet the operating requirements.
Secondly, check the feeding rod and rod, if the feeding center is different, wrong, the feeding rod is blocked, and the drying material is deformed, then correct or replace it in time.
Third, check whether the configuration of the fuel and feed rods matches, whether the fuel is too long, or whether the coal ash is too much debris that is affected by too much fuel supply.
Fourth, check the power of the motor, the internal combustion engine is too small, reversed, the motor wiring is wrong, and the overload shutdown may cause temper problems that cause illegal start of the burner.
Finally, check the relevant configuration, if the anti-tempering baffle is too large or the cross-section of the feed is too small, the impact of the biomass burner anti-tempering; the bottom wind is too large, the wind and air curtain is too large, and the smoke is directly behind the brain result.